Boiler Engineer
Wells& Surrounding Area

Our boiler engineers in Wells work on all major brands including Worcester Bosch, Vaillant, Baxi, Ideal, Viessmann, Glow-worm, and Potterton. Many are manufacturer-approved installers, meaning they can offer extended warranties on new installations. If you have a less common boiler brand, let us know and we will match you with an engineer who has experience with your specific model.

If your boiler is over 10 to 15 years old, breaks down frequently, or has an efficiency rating below A (90%+), replacement is usually more cost-effective than repeated repairs. A single repair costing over £400 on an older boiler is often not worthwhile. Modern condensing boilers are up to 30% more efficient than older models, so a new boiler can pay for itself through lower gas bills within 5 to 7 years.

Yes — it is a legal requirement for anyone working on gas boilers, gas fires, or gas cookers in the UK to be on the Gas Safe Register. It is a criminal offence to carry out gas work without registration, and unqualified work is extremely dangerous. Always ask your engineer for their Gas Safe ID card and verify it at GasSafeRegister.co.uk before allowing any work to begin.

Yes — most Gas Safe registered boiler engineers also handle radiator repairs, replacements, and balancing. Common radiator issues include cold spots (usually trapped air), leaking valves, and radiators that do not heat up due to sludge buildup. Radiator repairs typically cost £60 to £150, while fitting a new radiator including the unit costs £150 to £350.

A powerflush in Wells typically costs between £300 and £600, depending on the number of radiators in your system. This process removes sludge, rust and debris from your central heating, improving efficiency and preventing breakdowns. A powerflush is often recommended before fitting a new boiler to protect the new unit from contamination.

A standard annual boiler service takes 30 to 45 minutes. The engineer will inspect the boiler internals, check gas pressure and flow rate, carry out a flue gas analysis, and test all safety devices. You will receive a service record which you should keep as proof for your warranty. The engineer should also flag any parts showing early signs of wear.